Windows 10 enterprise deployment guide free download.Deploy Windows 10 Enterprise licenses
This package is used in the Capture User State step of the migration task sequence. For more information, windows 10 enterprise deployment guide free download Virtualization. Microsoft Endpoint Configuration Manager simplifies the deployment and management of Windows At the time of this writing, the only graphisoft archicad free 22 mode value is mdm. Create a new Powershell script in the root of the Wallpaper directory and copy this code into it :. We thought that regrouping all posts in a single one would save you time finding all needed SCCM Windows 10 deployments resources to start.
Windows 10 enterprise deployment guide free download. Complete SCCM Windows 10 Deployment Guide
On the computer you wish to convert, double-click the disk2vhd utility to start the graphical user interface. See the following example. Important : You must include the system volume in order to create a bootable VHD.
If this volume is not displayed in the disk2vhd tool, then the computer is likely to be using the GPT partition style. For more information, see Determine VM generation. Disk2vhd can save VHDs to local hard drives, even if they are the same as the volumes being converted. Performance is better however when the VHD is saved on a disk different than those being converted, such as a flash drive.
There should now be four files in this directory:. On the computer you wish to convert, open an elevated command prompt and type the following command:. This command temporarily assigns a drive letter of S to the system volume and mounts it. Volume shadow copy will not work if the EFI system partition is selected. The Windows RE tools partition shown below is not required, but it can also be converted if desired.
Note: the system volume is not copied in this scenario, it will be added later. In its current state, the w7. VHD file is not bootable. Important : Before proceeding, verify that you can take advantage of enhanced session mode when completing instructions in this guide.
After copying some text, you can paste into a Windows PowerShell window by simply right-clicking. Before right-clicking, do not left click other locations as this can empty the clipboard. You can also copy and paste files directly from one computer to another by right-clicking and selecting copy on one computer, then right-clicking and selecting paste on another computer.
To ensure that enhanced session mode is enabled on the Hyper-V host, type the following command at an elevated Windows PowerShell prompt on the Hyper-V host:. If enhanced session mode was not previously enabled, close any existing virtual machine connections and re-open them to enable access to enhanced session mode. As mentioned previously: instructions to “type” commands provided in this guide can be typed, but the preferred method is to copy and paste these commands.
Most of the commands to this point in the guide have been brief, but many commands in sections below are longer and more complex. To add available space for the partition, type the following commands at an elevated Windows PowerShell prompt on the Hyper-V host:. Open an elevated Windows PowerShell window and type the following command to create two virtual switches named “poc-internal” and “poc-external”:. If the Hyper-V host already has an external virtual switch bound to a physical NIC, do not attempt to add a second external virtual switch.
Attempting to add a second external switch will result in an error indicating that the NIC is already bound to the Microsoft Virtual Switch protocol. In this case, choose one of the following options: A Remove the existing external virtual switch, then add the poc-external switch B Rename the existing external switch to “poc-external” C Replace each instance of “poc-external” used in this guide with the name of your existing external virtual switch If you choose B or C , then do not run the second command below.
Note : The second command above will temporarily interrupt network connectivity on the Hyper-V host. Since an external virtual switch is associated to a physical network adapter on the Hyper-V host, this adapter must be specified when adding the virtual switch. Status -eq “Up” -and! If your Hyper-V host is dual-homed with multiple active ethernet adapters, this automation will not work, and the second command above will fail.
In this case, you must edit the command used to add the “poc-external” virtual switch by inserting the appropriate NetAdapterName. The NetAdapterName value corresponds to the name of the network interface you wish to use. At the elevated Windows PowerShell prompt, type the following command to determine the megabytes of RAM that are currently available on the Hyper-V host:.
If the computer has less RAM available than this, try closing applications to free up more memory. Other VMs will be added later. Note : The RAM values assigned to VMs in this step are not permanent, and can be easily increased or decreased later if needed to address performance issues.
Using the same elevated Windows PowerShell prompt that was used in the previous step, type one of the following sets of commands, depending on the type of VM that was prepared in the Determine VM generation section, either generation 1, generation 2, or generation 1 with GPT.
Do not forget to include a pipe at the end of the first five commands:. Type the following commands at an elevated Windows PowerShell prompt on the Hyper-V host to remove the temporary disks and drives from PC Click Next to accept the default settings, read the license terms and click I accept , provide an administrator password of pass word1 , and click Finish.
Right-click Start , point to Shut down or sign out , and click Sign out. The VM connection will reset and a new connection dialog box will appear enabling you to choose a custom display configuration.
Select a desktop size, click Connect and sign in again with the local Administrator account. Note: Signing in this way ensures that enhanced session mode is enabled. It is only necessary to do this the first time you sign in to a new VM. If DC1 is configured as described in this guide, it will currently be assigned an APIPA address, have a randomly generated hostname, and a single network adapter named “Ethernet.
Note: A list of available tasks for an app will be populated the first time you run it on the taskbar. Because these tasks aren’t available until the App has been run, you will not see the Run as Administrator task until you have left-clicked Windows PowerShell for the first time. In this newly created VM, you will need to left-click Windows PowerShell one time, and then you can right-click and choose Run as Administrator to open an elevated Windows PowerShell prompt.
Before promoting DC1 to a Domain Controller, you must reboot so that the name change in step 3 above takes effect. To restart the computer, type the following command at an elevated Windows PowerShell prompt:. Now you can promote the server to be a domain controller. The directory services restore mode password must be entered as a secure string. Type the following commands at the elevated Windows PowerShell prompt:.
The -Force option is necessary when adding scope options to skip validation of The scope should immediately begin issuing leases on the PoC network. Service accounts will be created to use for these tasks. A user account is also added in the contoso. In the test lab environment, passwords are set to never expire. To keep this test lab relatively simple, we will not create a custom OU structure and set permissions.
Required permissions are enabled by adding accounts to the Domain Admins group. To configure these settings in a production environment, see Prepare for Zero Touch Installation of Windows 10 with Configuration Manager. Next, the client VM will be started and joined to the contoso. This is done before adding a gateway to the PoC network so that there is no danger of duplicate DNS registrations for the physical client and its cloned VM in the corporate domain.
PC1 will be disconnected from its current domain, so you cannot use a domain account to sign on unless these credentials are cached and the use of cached credentials is permitted by Group Policy. This blog post is the first in a series of posts designed to provide a one-stop shop for virtual labs, demos, downloads, technical documentation, and other key resources related to a specific Windows 10 feature, scenario, deployment phase, or IT task.
So, here it is: a list of free resources to help you get ready for your next deployment, or get your your current deployment project unstuck and back on track. Free test lab environments including instructions and access to one or more virtual machines with no additional software or setup required. You must be a registered user to add a comment. If you’ve already registered, sign in.
Otherwise, register and sign in. Products 70 Special Topics 19 Video Hub Most Active Hubs Microsoft Teams. Security, Compliance and Identity. Microsoft Edge Insider. Azure Databases. For optimal performance, 32 GB of available memory and GB of free space is recommended. The kit expires August 23, A new version will be published prior to expiration. Feedback will be sent to Microsoft: By pressing the submit button, your feedback will be used to improve Microsoft products and services.